MOBi FiRMS Mobile Firmware, IMEI Repair, Unknown Baseband, Network Unlcok, FRP Bypass ETC
Operation : Identify [ v2.13 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device …
Device Connected!
BootVersion : SPRD3
Boot : INF : ZTE : ZTE Blade A3 Lite
Sending Init Boot …
Boot sent!
Kick FDL …
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup …
Port speed : 921600
Sending Flash Boot …
Boot sent!
Kick FLASH FDL …
FDL : 0x0004
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : PPR1.180610.011
Display ID : GEN_LA_A3_Lite_V1.0
Ver. Incmt : 20190612.172008
Ver. CodeName : REL
Ver. Release : 9
Sec. Patch : 2019-05-05
Build Time : 12.06.2019
Product Model : ZTE Blade A3 Lite
Product Brand : ZTE
Product Name : P932F20
Product Device : P932F20
Product Manfct : ZTE
Product Info : P932F20
Product Name : sp9832e_1h10_gofu
Product Device : sp9832e_1h10_go
Product Board : sp9832e_1h10_32b
Board Platform : sp9832e
Platform Version: MOCORTM_18A_W19.08.2_P7_Debug
Project Version: sharkle_Smart_Phone
BASE Version: FM_BASE_18A_W19.08.2_P7
HW Version: sc9832e_modem
CMP_Time : 05-21-2019 21:02:03
MODEM TAG : MOCORTM_18A_W19.08.2_P7_Debug_FM_BASE_18A_W19.08.2_P7_sc9832e_modem_sharkle_Smart_Phone
USERDATA : FILESYSTEM : F2FS with FDE ( Full Disk Encryption ***)
– > INFO : Remove cable from device to switch it off!
Done!
Elapsed: 00:00:57
=========================
FRP:
Operation : Format FS / Reset Settings [ v2.13 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device …
Device Connected!
BootVersion : SPRD3
Boot : INF : ZTE : ZTE Blade A3 Lite
Sending Init Boot …
Boot sent!
Kick FDL …
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup …
Port speed : 921600
Sending Flash Boot …
Boot sent!
Kick FLASH FDL …
FDL : 0x0004
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : Control transfered!
Boot Done!
Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP
Reconnect Power/Cable!
Done!
Elapsed: 00:00:24
================
Read Flash:
Operation : Read FW [ v2.13 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device …
Device Connected!
BootVersion : SPRD3
Boot : INF : ZTE : ZTE Blade A3 Lite
Sending Init Boot …
Boot sent!
Kick FDL …
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup …
Port speed : 921600
Sending Flash Boot …
Boot sent!
Kick FLASH FDL …
FDL : 0x0004
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : PPR1.180610.011
Display ID : GEN_LA_A3_Lite_V1.0
Ver. Incmt : 20190612.172008
Ver. CodeName : REL
Ver. Release : 9
Sec. Patch : 2019-05-05
Build Time : 12.06.2019
Product Model : ZTE Blade A3 Lite
Product Brand : ZTE
Product Name : P932F20
Product Device : P932F20
Product Manfct : ZTE
Product Info : P932F20
Product Name : sp9832e_1h10_gofu
Product Device : sp9832e_1h10_go
Product Board : sp9832e_1h10_32b
Board Platform : sp9832e
AndroidVer : 9
VlnrLevel : 0x02
SP9832E__ZTE__ZTE_Blade_A3_Lite__9__GEN_LA_A3_Lite_V1.0__PPR1.180610.011__P932F20
Read : u-boot.bin
Read : sml.bin
Read : tos.bin
Read : vbmeta.img
Read : dtb.img
Read : dtbo.img
Read : ldsp_l.bin
Read : gdsp_l.bin
Read : modem_l.bin
Read : deltanv_l.bin
Read : nvitem_l.bin
Read : modem_wcn.img
Read : gnssmodem.bin
Read : gnssbdmodem.bin
Read : pm_sys.bin
Read : boot.img
Read : recovery.img
Make : persist.img
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : system.img
Read : vendor.img
ExtSparse : Compression ratio : 76%
Read : otp_product.img
ExtSparse : Compression ratio : 3%
Make : userdata.img
Make : cache.img
Read : prodnv.img
ExtSparse : Compression ratio : 45%
Read : phase.cfg
Read : ztecfg.bin
Read : ztepersist.bin
ExtSparse : Compression ratio : 11%
Read : u-boot-spl.bin
Waiting for device …
ADB : Device found!
ADB : Connected!
ADB : Prepare Ok!
Found snow!
Found bear!
Found vodka!
Firmware size : 0x815F4C74 ( 2.02 GiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!
Done!
Elapsed: 00:13:42
