Technical Hardware & Software Specifications
TP1A.220624
Looking to fix your Dcode Bold 3 Pro (DS-BD3 Pro) smartphone? You’re in the right place. This official tested firmware helps you unbrick, repair, or restore your device to factory condition. Whether your phone is stuck on the logo, bootloop, or completely dead, this tested Dcode Bold 3 Pro firmware file can bring it back to life in minutes.
Built on the MT6789 platform, this firmware is 100% tested and verified for dead boot repair, FRP unlock, and performance restoration.
⚙️Firmware Details
- Device Name: Dcode Bold 3 Pro (DS-BD3 Pro)
- Platform: MT6789 (MediaTek)
- Android Version: 13
- Security Patch: 2024-09-05
- Build ID: DS_BD3_Pro_H1_20240918_V9.0
- Software Version: alps-mp-s0.mp1.rc-V15.40.1.s0mp1rc.k61v1.64.bsp_P41
- Build Date: 18 September 2024
This stock ROM package includes all essential partitions (preloader, boot, system, recovery, vendor, userdata) required for full restoration or flashing through SP Flash Tool or Miracle Thunder.
Why You Need This Firmware
If your Dcode Bold 3 Pro is:- Dead after flashing wrong file
- Stuck on boot logo or restart loop
- Not turning on or showing only charging logo
- Locked or corrupted software
Then flashing this tested firmware file will fix these issues. It also helps in IMEI repair, FRP bypass, and performance lag removal.
How to Flash
Download and extract the firmware package.Install MTK USB Drivers on your PC.
Open SP Flash Tool and load the scatter file.
Select “Download Only” or “Firmware Upgrade.”
Click Start, then connect your powered-off phone via USB.
Wait for the green check mark your device is successfully flashed!
⚠️ Always back up your data before flashing. Use only tested firmware to avoid permanent damage.
Pro Tips
- Use latest SP Flash Tool (v6.x) for MT6789 chipsets.
- If the phone doesn’t respond, try dead boot repair by selecting “Download + Format All.”
- After flashing, if IMEI is lost, restore using Maui Meta or SN Writer Tool.
Download Tested Firmware
👉 Download Dcode Bold 3 Pro Firmware (DS-BD3 Pro) MT6789
Safe, tested, and verified by MobiFirms technicians.
Conclusion
This Dcode Bold 3 Pro stock ROM is your go-to solution for dead boot repair, FRP unlock, and software fixing. It’s 100% safe, official, and designed for both technicians and beginners. Download now and restore your phone’s full performance!
⚡ Standard Flashing Requirements & Instructions
Prerequisites
- ✓ Charge device battery to at least 50%
- ✓ Use original OEM USB cable
- ✓ Backup all personal data & contacts
- ✓ Install proper USB / VCOM / Fastboot Drivers
Important Notice
Flashing factory firmware will erase all user data. Ensure you have verified your device model number and build code match before starting.
| Select / Version | Region | Size | Date Added | Action |
|---|---|---|---|---|
|
✓
v1.0
Latest
|
Global | 3Gb | Feb 15, 2026 |