Qmobile i10 2019 SP7731E flash file – Tested Firmware

SP7731E__QMobile__i102019__9__PPR1.180610.011__i10_2019

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device …

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot …
Boot sent!
Kick FDL …
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup …
Port speed : 921600
Sending Flash Boot …
Boot sent!
Kick FLASH FDL …
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : PPR1.180610.011
Display ID : PPR1.180610.011 release-keys
Ver. CodeName : REL
Ver. Release : 9
Sec. Patch : 2019-05-05
Build Time : 1558944550
Product Info : i10_2019
Product Model : i10 2019
Product Brand : QSmart,
Product Name : i10_2019
Product Device : i10_2019
Product Manfct : QMobile
Product Model : i10 2019
Product Model : i102019
Product Board : QSmart
Board Platform : sp7731e

VlnrLevel : 0x00

SP7731E__QMobile__i102019__9__PPR1.180610.011__i10_2019

Read : prodnv.img
ExtSparse : Compression ratio : 8%
Read : miscdata.bin
Read : recovery.img
Read : tos.bin
Read : sml.bin
Read : u-boot.bin
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : nvitem_w.bin
Make : persist.img
Read : gnssmodem.bin
Read : gnssbdmodem.bin
Read : modem_wcn.img
Read : modem_w.bin
Read : deltanv_w.bin
Read : gdsp_w.bin
Read : pm_sys.bin
Read : boot.img
Read : dtb.bin
Read : dtbo.bin
Read : system.img
ExtSparse : Compression ratio : 93%
Make : cache.img
Read : vendor.img
ExtSparse : Compression ratio : 49%
Read : product.bin
ExtSparse : Compression ratio : 2%
Read : vbmeta.img
Make : userdata.img
Read : u-boot-spl.bin

Android Info saved : _Android_info.txt
Reconnect Power/Cable!
Done!

Download from below link

[sociallocker id=338]Qmobile QSmart i10 2019 Firmware
Password:  i10ipro.bmsl[/sociallocker]