Overview: Tested KG Bypass Firmware for Samsung Galaxy A13 5G (SM-A136B)

Key Features and Functions:

1. KG Bypass/Remove: Permanently removes the Knox Guard/MDM lock, eliminating the "KG Locked" state.
2. Knox Removal: Neutralizes the device's Knox security features that often interfere with repair processes.
3. OEM Off & FRP Off State: Once flashed, this firmware sets the device parameters to OEM Unlocked and FRP (Factory Reset Protection) Off, allowing further modifications and flashing without security blocks.
4. Enables Flashing/Downgrade: Facilitates the use of standard flashing tools (like Odin) without triggering critical security warnings.

Important Requirements and Usage Notes:

• Binary Compatibility: This file is strictly for devices running Binary/Bootloader Version U2. Flashing on an incompatible binary version will result in a hard brick. Always check the device's current bootloader version before proceeding.
• Flash Tool: Requires Odin Tool (v3.14 or newer) to flash.
• Prerequisites: The device must be able to enter Download Mode.

Flashing Instructions (Summary)

1. Verify your device binary is U2.
2. Download the A136BXXS2AVI1 KG Bypass package and extract all files.
3. Open the latest version of Odin Flash Tool.
4. Load the four files (BL, AP, CP, CSC) into their respective slots. (Use the standard CSC file, NOT HOME_CSC).
5. Enter the SM-A136B into Download Mode.
6. Connect the phone and ensure Odin recognizes it (blue COM port).
7. Click Start and wait for the "PASS!" message.
8. The device will reboot into a state where OEM and FRP are permanently disabled, and the KG Check is removed.