Vivo Y01 PD2140F EX_A_36.52.0 Full Dump + Scatter 2024, 2025 (100% Tested) – Download Now

The Vivo Y01 PD2140F EX_A_36.52.0 Full Dump + Scatter file provided below is a fully tested, complete backup package used for chip-level repair, dead boot recovery, eMMC replacement, and software corruption issues. This file has been verified on multiple units, including:

Vivo Y01 / Y01A
Vivo Y02 / Y02s
Vivo Y15 / Y15s / Y15c
DAD Repair (All Tested)

If your device is stuck on logo, showing no baseband, rebooting nonstop, or completely dead (no port), this dump file helps restore the phone back to life.

📌 Firmware Details

Device:	Vivo Y01
Model:	PD2140F
Version:	EX_A_36.52.0
Android:	Android 11 (Go Edition)
Region:	Global
Security Patch:	Latest Supported
Package Type:	Full Dump + Scatter, ENG ROM, ENG Firmware
Status:	100% Tested

🎯 What This Firmware Fixes

This dump file is perfect for technicians working on software-level and chip-level faults. It helps fix:

Hang on Logo / Bootloop
Dead Boot (No Port)
No Power / No Display Issues
eMMC Replacement (Reprogram Using EasyJTAG, UFI)
No Baseband / Null IMEI
Network Not Working
FRP Reset / MDM Remove
KG Locked Fix
Fastboot Locked / Softbrick

🛠️ Required Tools (Recommended)

🔧 Required Drivers

📥 Download Vivo Y01 PD2140F EX_A_36.52.0 Full Dump + Scatter

File Type: Dump + Scatter
Status: Tested
Password: No Password
Format: ZIP

Download Firmware

📝 How to Flash (Step-by-Step)

Download & extract the firmware package.
Install MTK USB/VCOM drivers.
Open SP Flash Tool.
Load the scatter file from the extracted folder.
Select Download Only (or Full Format + Download for dead boot).
Click Download.
Switch off the phone, plug in with volume keys pressed.
Wait for the green OK sign.

⚠️ Cautions & Warnings

Always backup NVRAM/NVDATA if the device is alive.
Use dead boot repair carefully; avoid wrong scatter selection.
Do not flash preloader unless necessary.
IMEI repair must follow local regulations.

🩺 Troubleshooting Guide

📌 Vivo ID / Account

Use Test Point + Tool-based bypass. Firmware alone cannot remove Vivo ID.

📌 FRP Lock

Use SP Flash Tool → Format → FRP Address (included in dump).

📌 KG Locked

Flash correct region firmware. KG lock persists if security mismatch exists.

📌 No Baseband

Restore NVRAM + NVdata from dump or rebuild via UFI/EasyJTAG.

📌 IMEI Lost

Write IMEI using ModemMETA or professional box tools.

📌 Bootloop / Logo Hang

Flash system + vendor partitions only OR flash complete firmware.

📌 QDLoader 9008 Mode

Check for hardware short; reflash complete dump using EMMC/UFS programmer.

📌 Completely Dead

Use test point + preloader flash OR program full dump via EasyJTAG/UFI.

❓ Frequently Asked Questions

1. Is this firmware 100% tested?

Yes, tested on multiple Y01/Y02/Y15 devices.

2. Can this fix dead boot?

Yes, this dump is used mainly for dead boot & eMMC repair.

3. Will this remove FRP?

Yes, FRP can be removed via format or full dump rewrite.

4. Is preloader safe to flash?

Flash only if device is dead or bootloader is corrupted.

5. Does it support eMMC replacement?

Yes, dump includes full partitions for programming new eMMC.

6. Can this solve no baseband?

Yes, restoring modem + NVRAM fixes baseband issues.

7. Will KG lock be removed?

No. KG depends on server-side state; firmware only fixes soft-related parts.

Vivo Y01 PD2140F EX_A_36.52.0 Full Dump + Scatter (Tested) | Hang Logo Fix, Dead Boot Repair - 2025

Technical Hardware & Software Specifications